Rackmount 18 Port Power Supply, 12 Volts DC / 10 Amps, Supports 18 Cameras, 1U, 19 inch. The 19 inch 12VDC Rackmount Power Supply powers up to 18 of your 12 Volt DC devices and is designed to be rackmounted inside a server room or rack. The rackmount power supply includes a front panel LED indicator to monitor the power status of each port. A rear fan is included to supply efficient cooling to the unit. This unit does not include rack mount screws or a power cable. Rack Mountable Power Distribution AC Input Input Voltage Ranges: 115V AC ?10% Input Frequency: 60Hz Input Current: 6A RMS max. for 115 V AC Inrush Current: 60A max. DC Output Voltage: 12V DC Tolerance: ?5% Max. Current (18 Ports): 10A Port Current (each): 0.6A Peak Current (each): 1.0A Ripple & Noise: 120mv Line Regulation: ?1% Load Regulation: ?5% Total Output Power: 120W max. Electrical Specifications: Efficiency: 80% min. under max. range load Rise Time: 10ms Hold Up Time: 16ms Stability: 1% Overshoot: 10% Current Leakage: 3.5ma Output Protection Short Circuit Protection: +12V Over Current Protection: 110% – 150% Over Voltage Protection Environmental Operating Temperature: 0?C to 40?C Operating Humidity: 20% to 90% RH Operating Altitude: up to 10,000ft Storage Temperature: -20?C to +85%C Storage Humidity: 10% to 95% RH Storage Altitude: Up to 50,000ft Vibration: 10*500Hz, .2G 10Min/T-Cycle, period for 60min each axes Cooling: 4cm Fan Reliability MTBF: 100K Hours at Max. Load, Normal Line and 25?C Mechanical Physical Dimensions: 210 (L) x 248 (W) x 90(H)mm AC Connector: IEC 320 Type DC Connectors: Pitch: 9.50mm, Reted: 300V 20A, Screw Torque Value: 8.8Lb-in., suitable electric wire: 22-12AWG Dielectric Withstand Input to Output: 1500V AC for 1 Sec. Input to Frame Ground: 1500V AC for 1 Sec. Insolation Resistance Input to Output: 500V DC / 50 M Ohms Input to Frame Ground: 500V DC / 50 M Ohms

Part No. 90W2-19112